Garment Finishing Machine

        Low temperature – high pressure technology for that enables fast glue line penetration for optimum bonding to prevent any kind of distortion even on delicate fabrics.

        Fully Automatic pneumatic belt control system that ensures that belt will not lean and run smoothly without any problems.

        Very effective for shirt fusing and fusing delicate fabrics: Max. Pressure on these machines is 8kg/cm² and is very effective for fusing of shirts where double fusing is required at one time.  In other small machines, the fabric has to be passed twice for double fusing.

        Individual PID temperature controls for upper and lower heaters that enables precise settings of upper and lower temperatures. This is very useful for sensitive fabrics.

        Double silicon roller

        Precise speed and pressure digital controls.

        Seamless Belt (also called endless belt or belt without joints). Much better strength than belts with joints.

        PID Digital Temperature Controller to set constant temperature for uniform and optimum bonding. belt temperature, heating temperature & glue line temperature can be set as per your buyer’s requirement.

        Individual on off system for lower heaters for fusing of sensitive fabrics where lower heating is not required.

        Air Cooling system at the receiving end of the machine which gives better peel strength to the fabric & interlining and prevents the finger marks or any other type of distortion of the fabrics.

        Inspection table at loading area so that any fabric defect can be checked & stripes or check garment matching of the fabric & fusing is much convenient.

        Auto Stop: Automatic Cooling System which cools the machine before completely stopping to prevent the belts from burning or getting damaged.

        Overheating automatic switch off

        Pneumatic Pressure Control for precise pressure settings.

• Scissors-type close & vertical press.(All buck surface press at same time).
• Aluminum buck is suitable for garment (customaizable)
• Automatic LED.
• Controller (8 Programs) (Set:- Close, Press, Steam, vaccum)
• Period of Step:-0.5/1.0/1.5/2.0/2.5 second.
• 3 level safety protection device.
• Output single on electric board (easy to check faulty)
• Stainless steel board, steam heating system.
• Top buck steam spray (steam chamber supply much volume)
• Bottom buck has vacuum.
• Famous pneumatic parts.
• Dimension L*W*H : 1200x1200x1650
• Pneumatic Pressure adjustment for every type of fabric.
• Sensitive Ironing with Pat-pat Ironing function.
• Safety frame for operator safe optional.
• Computer (PLG) control. Laser pointer.

• Pneumatic Pressure adjustment for every type of fabric.
• Sensitive Ironing with Pat-pat Ironing function.
• Safety frame for operator safe optional.
• Computer (PLG) control. Laser pointer.
• Scissors-type close & press
• Metal buck is suitable for garment (customizable)
• Automatic led controller (8 programs)
• (Set close, press,steam,vacuum)
• Period of step: 0.5/1.0/1.5/2.0/2.5 second
• 3 level safety protection device.
• Output signal on electric board (easy to check ffaulty)
• 180 mm length shock absorber (long life)
• Stainless steel board, steam heating system
• Top buck steam spray (Italy-made value)
• Bottom buck has vacuum.
• Famous buck has vacuum Famous pneumatic parts.
• Dimension L*W*H : 900x1200x1300

• Easy and quick to set up Cold operating cycle
• Double operating system for felt spots & lean sports
• High pressure atomization of water & solvent
• Quick & halo – free drying action
• Minimum use of chemicals Two spotting guns with independent chemicals
• Optional: Steam spotting group,compressor,extra guns.
• By request Aura Auto Cleaning Machine can be supplied with electric vacuum unit foot starter.

• For attaining flawless finishing, AG-90 efficiently removes all the dust and waste threads in the garment.
• Two modes available.
• Direct Mode for heavy production.
• Pedal Mode to save power in lesser production. With Low Temperature- High Pressure Technology. Pressure up to 8 bars built in cooling device with both side riveted seamless belts and sensors for better alignment of belts safety. Optimum Adhesion, high pneumatic performance, Air cooling system, noiseless machine with Low power consumption.